in Ethylene Oxide, Steam and Irridation Sterilization
chamber is AISI 316L Stainless Steel.
jacket in AISI 304 Stainless Steel.
and piping are mirror finished with roughness of 0.5 u (240 grit).
welds on the chamber are ground smooth, x-rayed, and highly polished.
welding of piping.
chamber is baffled for proper steam distribution, thus minimizing
wetting of the load with condensate.
valves and fittings are sanitary.
indicators with diaphragm separator.
is provided using high density ceramic material covered with 430
stainless steel sheets.
structure and concealing panels are in 304 stainless steel.
is built following the strictest USA and International guidelines.
The autoclaves are manufactured with a standard ASME certification. ASME, cGMP,
ANSI/AAMI/ISO 11135-94, FDA, NFPA 560, NFPA 70 and USNEC and other certifications are available upon request.
equipment is manufactured following or exceeding the current GMP
rules. Easy validation as per FDA and international requirements.
All sterilizers are manufactured to
the latest ASME codes and registered with the National Board